WACI NX Jr E1 Web Access Control Interface

WACI NX Jr E1™

The WACI NX Jr E1 is WACI NX Controller with 7 Serial Ports, 4 Relays, 6 IR/RS232TX Ports, and 4 DSP i/o ports.

The specific control requirements of a system design determine the correct WACI NX configuration. Designers simply tally the control ports needed, then combinations of serial, relay, I/O and IR ports can be assembled to provide total control of all aspects of a centrally located system. Designers may contact Aurora for a system review and recommendations. Rapid field installation of expansion ports requires a technician to simply; check that the WACI Firmware version is 3.5, plug in the module, and tighten 4 screws. All of the added ports become available immediately.

BENEFITS:

• WACI can support the simplicity of the most powerful universal IR remote in the world, or it can be the heart of a complex, networked, worldwide asset management and control system


• No other control system on the market offers this combination of features in a compact, cost effective package.


• Greater expandability offers more flexibility (including secure wireless connectivity)


• Each WACI unit contains its own resources preventing slow performance and bottlenecks cause by shared systems.


• Integrates with the entire WACI control system series (including the WACI NX expansion bus add-on packs and IPF network expansion modules)


• The WACI NX expansion bus allows hard disk storage, battery backup features, streaming audio/video, and additional ports


• True platform-independent operation ? a wide range of OS compatibility (including with multiple OS simultaneous access across a common network)


• Programming is as easy as writing web pages with off-the-shelf content creation applications such as Macromedia Flash?, HTML, DHTML, SOAP, XML, CGI, RPC, and Visual Basic?


• Compatible with Microsoft? Internet Explorer 5.0 or higher, Netscape Navigator?, Mozilla Firefox?, and Apple? Safari? web browsers


• Pre-configure and test equipment, control or monitor connectivity using the built-in diagnostics and advanced event manager before writing any code


• Server side operation means that no dedicated server is required and that no special applications need to be installed on your PC to access the WACI control system.

Specifications
Size	5.80 x 4.90 x 1.90 inches
Hardware	Two 10/100T LAN Ports with Auto MDX and Auto Polarity One IR Input Port. 6 IR/1-way RS-232 ports 4 DSP ports ? TTL In/Out and analog inputs and outputs -5v to + 5v 4 isolated low-voltage relays C-Type 24VDC @1A 7 bidirectional serial ports One IR Learner. One High-speed, 2.1Gb/s card slot. One USB On-the-Go Port. One compact flash Type II slot for memory and/or 802.11b/g. OLED Display with 6 buttons. 15W 12v Power Supply. It also has an internal web server with built-in event manager.

Additional Information